Interface Two Computers Via Lan Cable

Transfer data from one computer to another. We need to PC/Laptop and a lan cable to transfer data.Data transmission, digital transmission, or digital communications is the physical transfer of data (a digital bit stream or a digitized analog signal[1]) over a point-to-point or point-to-multipoint communication channel. Examples of such channels are copper wires, optical fibers, wireless communication channels, storage media and computer buses. The data are represented as an electromagnetic signal, such as an electrical voltage, radiowave, microwave, or infrared signal.

PC 1
Step1: Go to “Open Networking and Sharing Center“.
Step2: Click on “Local Area Connection“.
Step3: Click on “Properties“.
Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“.
Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.1 and just give a click on Subnet mask. Once done click “Ok” and close it.

PC 2
Step1: Go to “Open Networking and Sharing Center“.
Step2: Click on “Local Area Connection“.
Step3: Now click on “Properties“.
Step4: Double click on “Internet Protocol Version 4(TCP/IPv6)“.
Step5: Click on “Use the following IP address:” and enter the IP address: as 192.168.1.2 and just give a click on Subnet mask. Once done click “Ok” and close it.

Presently  two PCs are joined. To share records we have to offer access to our drives, so take after the summons offered underneath to offer access to your drivers.

Step1: Click on "PC".

Step2: Right tap on driver and after that Properties.

Step3: Click on "Sharing" tab and after that Advance Sharing and afterward look at Share the envelope

Step4: Click on Permissions to give control on the other PC and once done snap "alright" and close it

Step5: Click Security and then next click on -->Advanced settings-->Change permissions-->Add-->Advance-->Find now

Note: If you share your data via WiFi the data transfer will be 1-2MB and if you share the data via Lan cable the data transfer will be 10-12MB